Wowwzzz: Flashing Lenovo A3000-H

First off all you need to know what is flashing?

Flashing is a process in which you can install a stock/custom ROM to your device. I guess this is the simplest explanation to flashing.

Why would you need to flash?

There are many reasons why you need to flash.

1. If your firmware is corrupted or not functioning you need to flash the stock firmware to your device in order to bring back your device to normal.

2. If you want to update or install custom ROM you need to flash the custom firmware

Here we are discussing flashing Lenovo ideatab A3000-H

First of all what you need is the firmware that you want to flash. You can download the firmware of your Lenovo ideatab A3000-h from here. After downloading you need to unrar the rar file, there you can see four folders modmbd, Sp_flash_tool_New,SP_flash_tool_old and target_bin. If you didn't find all of this we only need the target_bin. For So flash tool download it from here. For the drivers download it from here. Now we can move on to flashing.

First open the sp flash tool that is extracted from the rar file. [For the images see below]
Then select the scattering option in the flash tool and select the firmware folder and from there select the target bin folder and select the "MT 6589_scatter_emmc.text" the click the scatter button.
If fac is not ticked tick it and select the fac.img file from the target bin folder. Make Sure that "DA DL All with check sum" is ticked [for images refer below].
Now switch of your device and click download and connect to the PC using cable after 5 seconds.
Your device will start flashing a yellow bar will be seen at the bottom.
In case if yellow doesn't appear wait for a few time if still it doesn't appear repeat the process.
If the flashing is done succefully a green round box appears.
Now remove the USB cable and enjoy your device.

After switching on select the language.